TM 9-2320-366-34-3
16-64. M1089 30K WINCH DRIVE MOTOR ASSEMBLY REPLACEMENT/REPAIR (CONT)
(16) Remove two check ball plugs (21) from valve housing
(3).
(17) Remove two preformed packings (22) from check ball
plugs (21). Discard preformed packings.
WARNING
Use care when removing springs. Springs
are under tension and can act as
projectiles when released.
Failure to
comply may result in injury to personnel.
(18) Remove two springs (23) and check balls (24) from valve
housing (3).
NOTE
Match mark valve plate and geroler prior to
disassembly.
(19) Remove valve plate (4) from geroler (25).
(20) Remove seal (26) from valve plate (4). Discard seal.
(21) Remove valve drive (27) from geroler (25).
NOTE
Match mark geroler and wear plate prior to
disassembly.
(22) Remove geroler (25) from wear plate (28).
(23) Remove preformed packing (29) from wear plate (28).
Discard preformed packing.
(24) Remove star (30) and seven rollers (31) from geroler
(25).
(25) Remove drive (32) from bearing housing (1).
(26) Remove bearing housing (1) from vise.
16-380
