TM 9-2320-366-34-3
16-64. M1089 30K WINCH DRIVE MOTOR ASSEMBLY REPLACEMENT/REPAIR (CONT)
NOTE
Largest open pocket can be in any location
on geroler.
(15) Locate and mark position of largest open pocket in
geroler (14).
(16) Install valve drive (15) in geroler (14).
(17) Install preformed packing (16) in valve plate (17).
(18) Install valve plate (17) on geroler (14) with match marks
aligned.
(19) Align any open slot in valve plate (17) with largest open
pocket in geroler (14).
WARNING
Use care when installing springs. Springs
are under tension and can act as
projectiles when released. Failure to
comply may result in injury to personnel.
(20) Install two check balls (18) and springs (19) in valve
housing (20).
(21) Install two preformed packings (21) on check ball plugs
(22).
(22) Install two check plugs (22) in valve housing (20).
(23) Tighten two check ball plugs (22) to 40-60 lbs-in. (5-7
N·m).
16-384
