TM 9-2320-366-34-3
16-63. 30K WINCH ASSEMBLY REPLACEMENT/REPAIR (CONT)
(37) Install banding strap (38) on drum (1) and gear end
support (5).
(38) Position drum (1) with gear end cover (22) down.
(39) Remove banding strap (38) from drum (1) and gear end
support (5).
(40) Install preformed packing (39) and spacer (40) on output
shaft (3).
(41) Install bearing (41) in motor end support (42).
(42) Install thrust washer (43) in motor end support (42).
(43) Install seal (44) in motor end support (42).
(44) Position motor end support (42) on drum (1).
(45) Install bearing (45) in motor end support (42).
(46) Install 12 springs (46) in motor end support (42).
(47) Install preformed packing (47) on plunger (48)
(48) Install preformed packings (49 and 50) and back-up rings
(51 and 52) on plunger (48).
16-366
