TM 9-2320-366-34-3
(35) Apply sealing compound to threads of two screws (42)
and screws (43).
(36) Install two preformed packings (44), preformed packings
(45), and unloader control valve (46) on inlet body (6)
with two screws (42) and screws (43).
e. Installation.
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes.
Wear safety goggles/glasses
when using; avoid contact with eyes.
If
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(1) Apply sealing compound to threads of screws (1).
NOTE
Step (2) requires the aid of an assistant.
(2) Position three way control valve assembly (2) in crane
control panel (3) with four lockwashers (4) and screws
(1).
(3) Tighten four screws (1) to 41-45 lb-ft (56-61 N m).
(4) Connect eight hydraulic tubes (5) to fittings (6).
16-143
