TM 9-2320-366-34-3
(6) Install rivet eyebolt (10) in upper pivot shaft (9).
WARNING
Adhesive-sealant MIL-S-46163 can damage
your eyes. Wear safety goggles/glasses
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(7) Apply sealing compound to threads of screw (11).
(8) Position bushing (12), washer (13), and screw (11) in
rivet eyebolt (10).
(9) Tighten screw (11) to 190-210 lb-ft (258-285 N m).
(10) Install lower pivot shaft (14) in erection cylinder (2).
(11) Install rivet eyebolt (15) in lower pivot shaft (14).
(12) Apply sealing compound to threads of screw (16).
(13) Position bushing (17), washer (18), and screw (16) in
rivet eyebolt (15).
(14) Tighten screw (16) to 190-210 lb-ft (258-285 N m).
(15) Connect two hydraulic hoses (19) to 90-degree fittings (5
and 6).
c. Follow-On Maintenance.
(1) Lubricate MHC (TM 9-2320-366-20).
(2) Perform crane load test (para 16-31).
End of Task.
16-51
