TM 9-2320-366-34-3
(13) Install lift cylinder (2) in boom assembly (19) with pivot
shaft (20).
(14) Install rivet eyebolt (21) in pivot shaft (20).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles/glasses
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(15) Apply sealing compound to threads of screw (22).
(16) Install bushing (23), washer (24), and screw (22) in rivet
eyebolt (21).
(17) Tighten screw (22) to 190-210 lb-ft (258-285 N·m).
(18) Connect
hydraulic
hoses
(25
through
28)
to
counterbalance valve (6).
c. Follow-On Maintenance.
(1) Lubricate MHC (TM 9-2320-366-20).
(2) Perform crane load test (para 16-31).
End of Task.
16-47
