TM 9-2320-366-34-3
16-10. M1084/M1086 MAST REPLACEMENT (CONT)
WARNING
RH
lift
cylinder
assembly
weighs
approximately 100 lbs (45 kgs). Attach a
suitable lifting device prior to removal.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Step (4) requires the aid of an assistant.
(4) Remove screw (10), washer (11), and bushing (12) from
rivet eyebolt (13) at bottom of LH lift cylinder (14).
(5) Remove rivet eyebolt (13) from pivot shaft (15).
(6) Remove pivot shaft (15) from turntable (16).
(7) Remove RH lift cylinder (17) from turntable (16).
WARNING
Mast weighs approximately 120 lbs (54 kgs).
Attach a suitable lifting device prior to
removal. Failure to comply may result in
injury to personnel or damage to equipment.
(8) Position mast (18) in upright position on turntable (16).
(9) Remove eight screws (19), four clamps (20), and tubes
(21) from mast (18).
16-56
