TM 9-2320-366-34-3
(9) Remove screw (14), washer (15), and bushing (16) from
rivet eyebolt (17).
(10) Remove rivet eyebolt (17) from pivot shaft (18).
WARNING
Drive pivot shaft out far enough to release
tension link cylinder. Failure to comply
may result in injury to personnel or
damage to equipment.
NOTE
Steps (11) through (17) require the aid of an
assistant.
(11) Drive pivot shaft (18) from tension link cylinder (19).
(12) Position tension link cylinder (19) against turntable (20).
WARNING
Drive pivot shaft out far enough to release
mast. Failure to comply may result in injury
to personnel or damage to equipment.
(13) Drive pivot shaft (18) from mast (21).
(14) Position mast (21) against turntable (20).
16-37
