TM 9-2320-366-34-3
16-5. M1084/M1086 BOOM MID SECTION AND TELESCOPIC CYLINDER
REPLACEMENT/ADJUSTMENT (CONT)
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes.
Wear safety goggles/glasses
when using; avoid contact with eyes.
If
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(8) Apply sealing compound to threads of two screws (8).
(9) Position two cylinder support bars (9) and screws (8) in
boom mid section (7).
(10) Tighten screws (8) to 72-78 lb-ft (98-106 N·m).
WARNING
• Boom mid section and telescopic cylinder
combined weigh approximately 320 lbs (145
kgs). Attach suitable lifting device prior to
installation. Failure to comply may result in
injury to personnel or damage to equipment.
• A guide rope must be attached to aid in
controlling boom mid section and telescopic
cylinder during installation.
Failure to
comply may result in injury to personnel or
damage to equipment.
NOTE
Steps (11) through (13) require the aid of an
assistant.
(11) Install boom mid section (7) into boom base section (10).
16-32
