TM 9-2320-366-34-3
15-10. M1090/M1094 DUMP BODY REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Dump body cab protector removed (para 15-11).
Tailgate removed (TM 9-2320-366-20-4).
Pneumatic cylinder removed (TM 9-2320-366-20-5).
Troopseats removed, if equipped (TM 9-2320-366-10-2).
Mudflaps removed (TM 9-2320-366-20-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Pliers, Retaining Ring (Item 45, Appendix B)
Tools and Special Tools (Cont)
Goggles, Industrial (Item 28, Appendix B)
Sling, Cargo (4) (Item 56, Appendix B)
Lifting Brackets, Dump Body (4) (Item 8,
Appendix D)
Material/Parts
Shackle (4) (Item 80, Appendix C)
Personnel Required
(3)
WARNING
Wear appropriate eye protection when
working under vehicle due to possibility
of falling debris. Failure to comply may
result in injury to personnel.
a. Removal.
NOTE
Two lock pins are installed on each side of
dump body.
(1) Remove two safety pins (1) from lock pins (2).
(2) Remove two lock pins (2) from dump body (3).
15-138
