TM 9-2320-366-34-2
13-22. M1088 FRAME PLATE REPLACEMENT (CONT)
d. RH Installation.
WARNING
Frame plate weighs approximately 90 lbs
(41 kgs). Attach a suitable lifting device
prior to installation. Failure to comply
may result in damage to equipment or
injury to personnel.
NOTE
Steps (1) through (9) require the aid of an
assistant.
(1) Position frame plate (1) on vehicle with eight bolts (2)
and self-locking nuts (3).
(2) Tighten eight self-locking nuts (3) to 77-92 lb-ft (105-125
N·m).
(2.1) Cut two plastic edges (3.1) to approximately 9 in. (23
cm).
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(2.2) Apply adhesive to plastic edge (3.1).
(2.3) Install plastic edge (3.1) on support bracket (4).
13-178
Change 1
