TM 9-2320-366-34-2
13-22. M1088 FRAME PLATE REPLACEMENT (CONT)
(10) Position screw (13) in frame plate (1) with lockwasher
(14) and self-locking nut (15).
(11) Tighten self-locking nut (15) to 84-108 lb-in. (10-12 N·m).
(12) Position clamp (16) and terminal lug TL92 (17) on screw
(13) with self-locking nut (18).
(13) Tighten self-locking nut (18) to 84-108 lb-in. (10-12 N·m).
(14) Position two clamps (19) on frame plate (1) with two
bolts (20) and self-locking nuts (21).
(15) Tighten two self-locking nuts (21) to 84-108 lb-in. (10-12
N·m).
c. RH Removal.
(1) Remove self-locking nut (1), bolt (2), and clamp (3) from
frame plate (4). Discard self-locking nut.
13-176
Change 1
