TM 9-2320-366-34-2
13-23. FRONT LIFTING BRACKET REPLACEMENT
This task covers:
a. Removal (All Models Except M1093/M1094)
b. Installation (All Models Except M1093/M1094)
c. Removal (M1093/M1094)
d. Installation (M1093/M1094)
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Intake air cleaner removed (TM 9-2320-366-20-3).
Spare tire retainer removed (TM 9-2320-366-20-3).
Radiator overflow tank removed (TM 9-2320-366-20-
3).
Hydraulic reservoir removed, if equipped (TM 9-2320-
366-20-5).
Fuel tank removed (TM 9-2320-366-20-3).
Engine oil fill tube removed (TM 9-2320-366-20-3).
Transmission oil fill tube removed (all models except
M1093/M1094) (TM 9-2320-366-20-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Sling, Cargo (2) (Item 56, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Materials/Parts
Nut, Self-locking (4) (Item 212, Appendix F)
Nut, Self-locking (16) (Item 211, Appendix F)
Nut, Self-locking (6) (Item 215, Appendix F)
Bolt (16) (Item 16, Appendix F)
Nut, Self-locking (20) (Item 211, Appendix F)
Lockwasher (8) (Item 150, Appendix F)
Personnel Required
(3)
a. Removal (All Models Except M1093/M1094).
WARNING
Lifting beam weighs approximately 75 lbs (34
kgs). Attach a suitable lifting device prior to
removal. Failure to comply may result in
injury to personnel or damage to equipment.
NOTE
• Left and right side of front lifting bracket is
removed the same way. Right side shown.
• Steps (1) through (4) require the aid of an
assistant.
(1) Remove two pins (1) and lifting beam (2) from front lifting
bracket (3).
13-181
