TM 9-2320-366-34-2
NOTE
Both support brackets are installed the same
way. One support bracket shown.
(3) Position support bracket (4) on vehicle with two bolts (5)
and self-locking nuts (6).
(4) Tighten two self-locking nuts (6) to 120-147 lb-ft (264-
324 N·m).
(5) Perform steps (2.2) through (4) on remaining support
bracket.
(6) Position eight bolts (7) and self-locking nuts (8) in rear
torque arm bracket (9).
(7) Tighten eight self-locking nuts (8) to 390-510 lb-ft (529-
691 N·m).
(8) Position three brackets (10) on frame plate (1) with three
bolts (11) and self-locking nuts (12).
(9) Tighten three self-locking nuts (12) to 77-92 lb-ft (105-
125 N·m).
Change 1
13-175
