TM 9-2320-366-34-2
13-11. M1083/M1093/M1090/M1094 STRUCTURAL SUPPORT REPLACEMENT (CONT)
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(6) Remove collar (12) and bolt (13) from rear axle shock
absorber rear bracket (14). Discard collar and bolt.
(7) Remove collar (15), bolt (16), and rear axle shock
absorber rear bracket (14) from frame rail (17). Discard
collar and bolt.
(8) Perform steps (3) through (7) on right side of structural
support.
(9) Remove structural support (6) from vehicle.
d. M1090/M1094 Installation.
NOTE
• Left and right side of structural support is
installed the same way. Right side shown.
• Steps (1) through (10) require the aid of an
assistant.
(1) Position structural support (1) and rear axle shock
absorber rear bracket (2) on frame rail (3) with bolt (4)
and self-locking nut (5).
(2) Position bolt (6) and self-locking nut (7) in rear axle
shock absorber rear bracket (2).
(3) Tighten self-locking nuts (5 and 7) to 210-225 lb-ft (285-
305 N·m).
13-76
