TM 9-2320-366-34-2
NOTE
• Left and right side of structural support is
removed the same way. Right side shown.
• Perform step (4) on vehicle serial numbers 0001
through 1398 and 2988 and higher serial
numbers.
(4) Remove self-locking nut (7), bolt (8), and washer (9)
from rear axle shock absorber (10). Discard self-locking
nut.
NOTE
Perform step (5) on vehicle serial numbers
1399 through 2987.
(5) Remove self-locking nut (7), bolt (8), and three washers
(11) from rear axle shock absorber (10). Discard self-
locking nut.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(6) Remove collar (12) and bolt (13) from rear axle shock
absorber front bracket (14). Discard collar and bolt.
(7) Remove collar (15), bolt (16), rear axle shock absorber
front bracket (14), two washers (16.1), and bracket (17)
from frame rail (18).
Change 1
13-71
