TM 9-2320-366-34-2
b. M1083/M1093 Installation.
NOTE
Left and right side of structural support is
installed the same way. Right side shown.
Steps (1) through (17) require the aid of an
assistant.
(1) Position structural support (1) on vehicle.
(2) Position rear bumper stop (2) on frame rail (3) with two
bolts (4) and self-locking nuts (5).
(3) Position two bolts (6) and self-locking nuts (7) in
structural support (1).
(4) Tighten two self-locking nuts (7) to 77-92 lb-ft (105-125
N·m).
(5) Tighten two self-locking nuts (5) to 210-225 lb-ft (285-
305 N·m).
(6) Position rear axle shock absorber rear bracket (8) on
frame rail (3) with two bolts (9) and self-locking nuts (10).
(7) Tighten two self-locking nuts (10) to 210-225 lb-ft (285-
305 N·m).
(8) Position two washers (10.1), bracket (11), rear axle
shock absorber front bracket (12), bolt (13), and self-
locking nut (14) on frame rail (3).
(9) Position bolt (15) and self-locking nut (16) in rear axle
shock absorber front bracket (12).
(10) Tighten self-locking nuts (14 and 16) to 210-225 lb-ft
(285-305 N·m).
Change 1
13-73
