TM 9-2320-366-34-2
13-10. M1093/M1094 ANGLE BRACKET REPLACEMENT
This task covers:
a. LH Removal
b. LH Installation
c. RH Removal
d. RH Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Air dryer removed (LH side) (TM 9-2320-366-20-5).
Muffler and heat shield removed (RH side) (TM 9
2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Tools and Special Tools (Cont)
Socket Set, Impact (Item 58, Appendix B)
Materials/Parts
Bolt (6) (Item 7, Appendix F) (LH side)
Nut, Self-locking (6) (Item 211, Appendix F) (LH
side)
Bolt (4) (Item 7, Appendix F) RH side)
Nut, Self-locking (4) (Item 211, Appendix F) (RH
side)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. LH Removal.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
Step (1) requires the aid of an assistant.
Remove six collars (1), bolts (2), and angle bracket (3)
from frame rail (4). Discard collars and bolts.
13-67
