TM 9-2320-366-34-2
Section II. MAINTENANCE PROCEDURES
13-2. M1093/M1094 SIDELOAD BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Wrench, Torque, 0-150 lb-ft (Item 90, Appendix B)
Crowfoot Attachment, Socket Wrench (TM 9-2320-
366-20)
Tools and Special Tools (Cont)
Socket Set, Impact (Item 58, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Materials/Parts
Nut, Self-locking (Item 182, Appendix F)
Nut, Self-locking (6) (Item 211, Appendix F)
Bolt (5) (Item 7, Appendix F)
Personnel Required
(2)
a. Removal.
NOTE
• Left and right side sideload brackets are
removed the same way. Right side shown.
• Steps (1) through (4) require the aid of an
assistant.
(1) Remove self-locking nut (1) and bolt (2) from sideload
bracket (3). Discard self-locking nut.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(2) Remove three collars (4) and bolts (5) from sideload
bracket (3). Discard collars and bolts.
13-3
