TM 9-2320-366-34-2
13-4. M1093 PARACHUTE SUSPENSION ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance.
INITIAL SETUP
Equipment Conditions
Parachute slide assemblies removed (TM 9-2320-
366-20-4).
Cargo bed removed (para 15-9).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Tools and Special Tools (Cont)
Sling, Cargo (Item 56, Appendix B)
Materials/Parts
Nut, Self-locking (28) (Item 212, Appendix F)
Personnel Required
(2)
a. Removal.
NOTE
Steps (1) through (4) require the aid of an
assistant.
(1) Remove 14 self-locking nuts (1) and bolts (2) from
parachute suspension assembly (3). Discard self-locking
nuts.
(2) Perform step (1) on left side of parachute suspension
assembly.
WARNING
Parachute suspension assembly weighs
approximately 250 lbs (113 kgs). Attach a
suitable lifting device prior to removal.
Failure to comply may result in damage to
equipment or injury to personnel.
(3) Remove lanyard (4) from parachute suspension
assembly (3).
(4) Remove parachute suspension assembly (3) from
vehicle.
13-8
