TM 9-2320-366-34-2
(56) Disconnect test cable (13) from pressure transducer (12).
(57) Remove pressure transducer (12) from snubber (11).
(58) Remove snubber (11) from tee fitting (10).
(59) Disconnect supply hose (8) from tee fitting (10).
(60) Remove tee fitting (10) from adapter (9).
(61) Connect supply hose (8) to adapter (9).
(62) Check power steering reservoir fluid level
(TM 9-2320-366-10-1).
(63) Lower cab (TM 9-2320-366-10-1).
(64) Start engine (TM 9-2320-366-10-1).
(65) Turn steering wheel full left and right two times.
(66) Check under vehicle for steering fluid leaks from supply
hose (8).
(67) Shut down engine (TM 9-2320-366-10-1).
(68) Position front grille (3) on cab (6) with washer (5) and
screw (4).
(69) Position two washers (2) and screws (1) in front grille
(3).
(70) Tighten screw (4) to 48-60 lb-in (5-7 N·m).
(71) Tighten two screws (1) to 24 lb-in (3 N·m).
End of Task.
All data on pages 12-16 through 12-18,
Change 1
12-15/(12-16 Blank)
including pages12-17 and 12-18 deleted.
