TM 9-2320-366-34-2
13-3. FRONT ANGLE BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
c.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Resilient mount removed (TM 9-2320-366-20-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Tools and Special Tools
Adapter, Socket Wrench (Item 4, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Materials/Parts
Bolt (2) (Item 2, Appendix F)
Nut, Self-Locking (2) (Item 204, Appendix F)
WARNING
Wear appropriate eye protection when
working under vehicle. Falling debris may
cause eye injury. Failure to comply may
result in injury to personnel.
a. Removal.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
Left and right side front angle brackets are
removed the same way. Left side shown.
Remove two collars (1), bolts (2), and front angle bracket
(3) from frame (4). Discard bolts and collars.
13-6
