TM 9-2320-366-34-2
10-4. REAR AXLE BOGIE SHAFT REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Rear axle bogie removed (para 10-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Wrench, Set, Socket (Item 84, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Materials/Parts
Nut, Self-Locking (8) (Item 211, Appendix F)
Bolt (4) (Item 20, Appendix F)
Grease, Automotive and Artillery (Item 33,
Appendix C)
Personnel Required
(2)
a. Removal.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply may
result in seizing of collar to bolt.
NOTE
• Left and right side rear axle bogie shafts are
removed the same way. Right side shown.
• Steps (1) and (2) require the aid of an assistant.
(1) Remove four collars (1) and bolts (2) from rear axle
bogie shaft (3). Discard collars and bolts.
(2) Remove four self-locking nuts (4), bolts (5), and rear axle
bogie shaft (3) from frame rail (6). Discard self-locking
nuts.
10-28
