TM 9-2320-366-34-2
d. Rear Axle Shock Absorber Rear Bracket Installation.
NOTE
• Left and right side rear axle shock absorber rear
brackets are installed the same way. Right side
shown.
• Steps (1) through (3) require the aid of an
assistant.
(1) Position rear axle shock absorber rear bracket (1) on
frame rail (2) with bolt (3) and self-locking nut (4).
(2) Position bolt (5) and self-locking nut (6) in rear axle
shock absorber rear bracket (1).
(3) Tighten self-locking nuts (4 and 6) to 210-225 lb-ft (285-
305 N·m).
NOTE
Perform steps (4) and (5) on vehicle serial
numbers 1399 through 2987.
(4) Position rear axle shock absorber (7) in two rear axle
shock absorber brackets (1) with three washers (8), bolt
(9), and self-locking nut (10).
(5) Tighten self-locking nut (10) to 195-239 lb-ft (264-324
N·m).
NOTE
Perform steps (6) and (7) on vehicle serial
numbers 0001 through 1398 and 2988 and
higher serial numbers.
(6) Position rear axle shock absorber (7) in two rear axle
shock absorber brackets (1) with washer (11), bolt (9),
and self-locking nut (10).
(7) Tighten self-locking nut (10) to 195-239 lb-ft (264-324
N·m).
14-47
