TM 9-2320-366-34-2
NOTE
Perform steps (6) and (7) on vehicle serial
numbers 0001 through 1398 and 2988 and
higher serial numbers.
(6) Position rear axle shock absorber (7) in two rear axle
shock absorber brackets (1) with washer (11), bolt (9),
and self-locking nut (10).
(7) Tighten self-locking nut (10) to 195-239 lb-ft (264-324
N·m).
c. Rear Axle Shock Absorber Rear Bracket Removal.
NOTE
• Left and right side rear axle shock absorber rear
brackets are removed the same way. Right side
shown.
• Perform step (1) on vehicle serial numbers 0001
through 1398 and 2988 and higher serial
numbers.
(1) Remove self-locking nut (1), bolt (2), and washer (3)
from rear axle shock absorber (4). Discard self-locking
nut.
14-45
