TM 9-2320-366-34-2
14-9. REAR AXLE SHOCK ABSORBER BRACKET REPLACEMENT (CONT)
b. Rear Axle Shock Absorber Front Bracket Installation.
NOTE
• Left and right side rear axle shock absorber
front brackets are installed the same way. Right
side shown.
• Steps (1) through (3) require the aid of an
assistant.
(1) Position rear axle shock absorber front bracket (1) on
frame rail (2) with bolt (3) and self-locking nut (4).
(2) Position bolt (5) and self-locking nut (6) in rear axle
shock absorber front bracket (1).
(3) Tighten self-locking nuts (4 and 6) to 210-225 lb-ft (285-
305 N·m).
NOTE
Perform steps (4) and (5) on vehicle serial
numbers 1399 through 2987.
(4) Position rear axle shock absorber (7) in two rear axle
shock absorber brackets (1) with three washers (8), bolt
(9), and self-locking nut (10).
(5) Tighten self-locking nut (10) to 195-239 lb-ft (264-324
N·m).
14-44
