TM 9-2320-366-34-2
14-5. REAR TORQUE ROD REPLACEMENT
This task covers:
a. Removal
b. Installation
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Rear wheels removed (side being worked) (TM 9-2320-
366-10-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Jack, Dolly Type (Item 37, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Tools and Special Tools (Cont)
Trestles, Motor Vehicle Maintenance (2) (Item
81, Appendix B)
Multiplier, Torque Wrench (Item 42, Appendix B)
Bar, Wrecking (Item 6, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Materials/Parts
Nut, Self-Locking (2) (Item 239, Appendix F)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Left and right side torque rods are removed
the same way. Left side shown.
(1) Raise rear of truck on left side of vehicle and place
trestles under frame.
(2) Remove two self-locking nuts (1) from torque rod (2).
Discard self-locking nuts.
(3) Remove torque rod (2) from mounting bracket (3) and
axle (4).
14-20
