TM 9-2320-366-34-2
(8) Raise leaf spring (2) against rear bogie axle (10).
(9) Position clamp plate (11), two U-bolts (12), four washers
(13), and self-locking nuts (14) on bogie axle (10).
(10) Tighten four self-locking nuts (14) to 200 lb-ft (271 N·m)
in sequence shown.
(11) Re-tighten four self-locking nuts (14), in increments of 50
lb-ft (68 N·m), to 390-510 lb-ft (529-692 N·m in sequence
shown.
(12) Remove trestles from frame (15).
c. Follow-On Maintenance.
(1) Install rear wheels (TM 9-2320-366-10-2).
(2) After first 1000 miles of vehicle operation, tighten self-
locking nuts on U-bolts, in increments of 50 lb-ft (68
N·m), to 390-510 lb-ft (529-692 N·m) in crisscross
pattern.
End of Task.
14-19
