TM 9-2320-366-34-2
14-4. REAR LEAF SPRING REPLACEMENT (CONT)
b. Installation.
(1) Position rear resilient mount (1) on rear leaf spring (2)
with four self-locking nuts (3).
(2) Position front resilient mount (4) on rear leaf spring (2)
with four self-locking nuts (5).
(3) Tighten four self-locking nuts (3 and 5) to 43-51 lb-ft (58-
69 N·m).
NOTE
Step (4) requires the aid of an assistant.
(4) Install rear leaf spring (2) on intermediate axle (6) and
rear axle (7).
NOTE
It may be necessary to raise or lower floor
jack slightly to properly align rear leaf spring
with axles.
(5) Position four bolts (8) on forward resilient mount (4).
(6) Position four bolts (9) on rear resilient mount (1).
(7) Tighten four bolts (8 and 9) to 43-51 lb-ft (58-69 N·m).
14-18
