TM 9-2320-366-34-2
14-3. FRONT LEAF SPRING SHACKLE AND PIN REPLACEMENT (CONT)
CAUTION
• Use care when installing pin to prevent damage
to lubrication fitting hole threads.
Failure to
comply may result in damage to equipment.
• Ensure spring pin is positioned so grove faces
slot in rear shackle. Failure to comply may
result in damage to equipment.
NOTE
• Step (5) requires the aid of an assistant.
• Lubricate spring pin prior to installation.
(5) Install leaf spring (9) on shackle (2) with spring pin (10).
(6) Install lubrication fitting (11) in spring pin (10).
(7) Position screw (12) and self-locking nut (13) in rear
bracket (3).
(8) Tighten self-locking nut (13) to 76-94 lb-ft (103-127 N·m).
NOTE
• Perform steps (9) and (10) on RH side of
vehicle.
• Steps (9) and (10) require the aid of an
assistant.
(9) Position exhaust pipe (14) on muffler (15) and engine
exhaust extension (16).
(10) Tighten two nuts (17) on clamps (18) to 73-126 lb-in (8-
14 N·m).
14-14
Change 1
