TM 9-2320-366-34-2
k. Sliding Mechanism Disassembly.
(1) Remove nut (1), washer (2), screw (3), and lever (4)
from lever (5).
(2) Remove bushing (6) from lever (4).
(3) Remove nut (7), screw (8), and lever (9) from lever (5).
(4) Remove bushing (10) from lever (9).
(5) Remove screw (11), bushing (12), and lever (5) from
sliding mechanism (13).
WARNING
Use care when removing springs. Springs
are under tension and can act as
projectiles when released.
Failure to
comply may result in injury to personnel.
NOTE
• Left and right side plungers are removed the
same way. Left side shown.
• Springs must be compressed to access pivot
pins.
(6) Remove pivot pin (14) and lever (4) from plunger (15).
Change 1
13-411
