TM 9-2320-366-34-2
h. Compensator Disassembly.
(1) Remove four lubrication fittings (1) from compensator (2).
(2) Remove four 45-degree lubrication fittings (3) from
compensator (2).
(3) Remove two lubrication fittings (4) and cushions (5) from
shoes (6).
(4) Remove two shoes (6), washers (7), cushions (8),
washers (9), springs (10), and tie rod (11) from
compensator (2).
NOTE
Left and right side adjusting plates are
removed the same way. Right side shown.
(5) Remove two nuts (12), lockwashers (13), shim(s) (14),
and adjusting plate (15) from compensator (2). Discard
lockwashers.
(6) Perform step (5) on right side adjusting plate.
13-407
