TM 9-2320-366-34-2
(6) Inspect two shoes (4) for distortion, wear, and cracking.
NOTE
Replace two shoes if base measurement
exceeds minimum thickness.
(7) Measure two shoes (4), minimum wear 0.03 in. (0.002
cm).
(8) Inspect two cushions (5 and 6) for distortion, wear, and
cracking.
(9) Inspect two washers (7 and 8) for distortion, wear, and
cracking.
(10) Inspect two springs (9) for distortion, wear, and cracking.
(11) Inspect tie rod (10) for distortion, wear, and cracking.
(12) Position two shoes (4) in compensator (1).
NOTE
Replace adjusting plate or add shim(s) if gap
exceeds maximum clearance.
(13) Measure gap (A) between two shoes (4) and adjusting
plates (2), maximum clearance 0.06 in. (0.001 cm).
(14) Remove two shoes (4) from compensator (1).
13-409
