TM 9-2320-366-34-2
CAUTION
Ensure hole in stud is lined up correctly
with yoke hole.
Failure to comply will
result in damage to equipment.
(6) Install stud (9) in fifth wheel top plate (2).
(7) Install manual control handle (10) in fifth wheel top plate
(2) with washer (11), spring (12), washer (13), and cotter
pin (14).
(8) Install control cam (15) on manual control handle (10).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles when
using; avoid contact with eyes. If sealant
contacts eyes, flush eyes with water and
get immediate medical attention. Failure
to comply may result in injury to
personnel.
(9) Apply sealing compound to threads of screw (16).
(10) Install washer (17), bearing (18), washer (19), and screw
(16) in control cam (15).
(11) Install roller (20), two washers (21), and screw (22) in
control cam (15) with self-locking nut (23).
13-405
