TM 9-2320-366-34-4
26-7. M1084/M1086 LIFT CYLINDER REPAIR
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
INITIAL SETUP
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Hammer, Non-Sparking (Item 33, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Vise, Machinists (Item 82, Appendix B)
Pan, Drain (Item 43, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Caps, Vise Jaw (Item 12, Appendix B)
Materials/Parts
Kit, Repair (Item 94, Appendix F)
Kit, Repair (Item 102, Appendix F)
Rag, Wiping (Item 60, Appendix C)
Lubricating Oil, Engine (Item 46, Appendix C)
Solvent, Dry Cleaning (Item 83, Appendix C)
Personnel Required
(2)
a. Disassembly.
WARNING
Lift cylinder weighs approximately 100 lbs
(45 kgs). The aid of an assistant is
required to safely move it.
Failure to
comply may result in injury to personnel
or damage to equipment.
NOTE
Step (1) requires the aid of an assistant.
(1) Position cylinder barrel (1) in vise.
(2) Place drain pan under cylinder barrel (1).
(3) Remove set screw (2) and cylinder head (3) from
cylinder barrel (1).
26-40
