TM 9-2320-366-34-4
26-6. M1084/M1086/M1089 OIL FILLED DISC BRAKE ASSEMBLY REPAIR (CONT)
(15) Position shaft (9) in ring gear (14) with gear (11) resting
slightly above ring gear.
(16) Alternately install eight stators (17) and seven discs (18)
in ring gear (14).
(17) Install two oil seals (19) in end cap (20).
(18) Install preformed packing (21) in end cap (20).
(19) Fill ring gear (14) with oil.
(20) Install end cap (20) on ring gear (14) with match marks
aligned.
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(21) Apply sealing compound to threads of six bolts (22).
(22) Position six washers (23) and bolts (22) in end cap (20).
(23) Tighten bolts (22) to 30-38 ft-lb (41-52 N.m).
26-38
