TM 9-2320-366-34-4
(6) Install ring (8) on shaft (9).
(7) Install key (10) on shaft (9).
CAUTION
Install gear with holes in direction noted
during disassembly. Failure to comply may
result in damage to equipment.
(8) Install gear (11) on shaft (9).
(9) Install retaining ring (12) on shaft (9).
(10) Install preformed packing (13) on ring gear (14).
(11) Install ring gear (14) on cover (2) with match marks
aligned.
WARNING
Adhesive-Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel
(12) Apply sealing compound to threads of six bolts (15).
(13) Position six bolts (15) and washers (16) on cover (2).
(14) Tighten bolts (15) to 30-38 ft-lb (41-52 N m).
26-37