TM 9-2320-366-34-4
26-3. M1084/M1086 SWING DRIVE HYDRAULIC MOTOR REPAIR (CONT)
(5) Inspect spur gear shaft (4) for nicks, pitting, or corrosion.
(6) Inspect geroler (5) for cracks, scoring, pitting, or
corrosion.
c. Assembly.
NOTE
Apply lubricating oil to all parts during assembly.
(1) Install output shaft (1) in motor housing (2).
(2) Install roller retainer (3) and inner bearing (4) on output
shaft (1).
(3) Install retainer (5), seal (6), and preformed packing (7) in
motor housing flange (8).
(4) Install gasket (9) in motor housing flange (8).
26-16
