TM 9-2320-366-34-4
26-3. M1084/M1086 SWING DRIVE HYDRAULIC MOTOR REPAIR (CONT)
(5) Remove spacer plate (8) from motor housing (1).
(6) Remove spur gear shaft (9) from motor housing (1).
(7) Remove preformed packing (10) from motor housing (1).
Discard preformed packing.
(8) Reposition motor housing (1) in vise with output shaft (2)
up.
(9) Remove four screws (11) from motor housing flange
(12).
(10) Remove motor housing flange (12) from motor housing
(1).
(11) Remove gasket (13), preformed packing (14), seal (15),
and retainer (16) from motor housing flange (12).
Discard gasket, preformed packing, seal, and retainer.
26-14
