TM 9-2320-366-34-4
(2) Remove spur gear (3) from clutch assembly (2).
(3) Remove bushing (4) from spur gear (3).
(4) Remove thrust bearing (5) from clutch assembly (2).
(5) Remove C2 drive hub (6) from clutch assembly (2).
(6) Remove thrust bearing (7) from C2 drive hub (6).
(7) Remove C1 drive hub (8) from clutch assembly (2).
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(8) Remove retaining ring (9) from clutch assembly (2).
(9) Remove clutch disk (10) from clutch assembly (2).
(10) Remove six clutch disk (11) and intermediate plates (12)
from clutch assembly (2).
(11) Remove retaining ring (13) from shaft (14).
(12) Remove shaft (14) from clutch assembly (2).
(13) Remove preformed packing (15), three sealrings (16),
and bushing sleeve (17) from shaft (14).
Discard
sealrings and preformed packing.
21-21
