TM 9-2320-366-34-4
21-3. FRONT SUPPORT/CHARGING PUMP MODULE REPAIR (CONT)
c. Assembly.
NOTE
Perform steps (1) and (2) if replacing pump
housing not equipped with a main relief valve
and cycloidal gear to pump housing equipped
with main relief valve and cycloidal gear.
(1) Replace drive hub PN 29503970 and gear PN 29511395
with drive hub PN 29514799 and gear PN 29511395
(para 20-5).
(2) Replace converter pump PN 29503570 or 29511380 with
converter pump PN 29514788 (para 7-14).
(3) Install two dowel pins (1) in front support (2).
(4) Install spacer (3) on front support (2).
CAUTION
Ensure flat surface on ground sleeve is
aligned with index arrow on front support.
Failure to comply may result in damage to
equipment.
(5) Install ground sleeve (4) in front support (2).
(6) Install roller bearing (5) on front support (2) flush to
within 0.009 in. (0.022 cm) of top edge of front support
(2).
21-18
