TM 9-2320-366-34-4
21-4. ROTATING CLUTCH MODULE REPAIR
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transmission disassembled (para 21-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Press, Arbor, Hand Operated (Item 48, Appendix B)
Inserter and Remover, Spring (TM 9-2320-366-20)
Bushing Driver Set (TM 9-2320-366-20)
Handle, Drive (TM 9-2320-366-20)
Caliper, Vernier (Item 11, Appendix B)
Straight Edge (Item 71, Appendix B)
Pliers, Retaining Ring (Item 45, Appendix B)
Pliers, Retaining Ring (Item 44, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Materials/Parts
Parts Kit, Seal Replacement (Item 317,
Appendix F)
Packing, Preformed (Item 295, Appendix F)
Sealring (Item 400, Appendix F)
Sealring (Item 401, Appendix F)
Sealring (Item 402, Appendix F)
Sealring (Item 403, Appendix F)
Rag, Wiping (Item 60, Appendix C)
Lubricating Oil, Engine (Item 46, Appendix C)
Cloth, Abrasive (Item 22, Appendix C)
Solvent, Dry Cleaning (Item 83, Appendix C)
a. Disassembly.
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(1) Remove retaining ring (1) from clutch assembly (2).
21-20
