TM 9-2320-366-34-4
21-2. TRANSMISSION REPAIR (CONT)
(16) Tighten three bolts (14 and 15) to 66-81 lb-ft (90-110
N·m).
(17) Tighten 15 bolts (13) to 40-42 lb-ft (54-57 N·m).
(18) Position main housing (1) horizontal with ground.
NOTE
Step (19) requires the aid of an assistant.
(19) Install rotating clutch (18) in main housing (1).
(20) Position front support pump (19) on main housing (1)
with five bolts (20) and six bolts (21).
(21) Tighten five bolts (20) and six bolts (21) to 42-50 lb-ft
(57-68 N·m).
WARNING
Torque
converter
housing
weighs
approximately 65 lbs (30 kgs). Attach a
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Step (22) requires the aid of an assistant.
(22) Position gasket (22) and torque converter housing (23)
on main housing (1) with 20 bolts (24).
(23) Tighten 20 bolts (24) to 42-50 lb-ft (57-68 N·m).
21-10
Change 1
