TM 9-2320-366-34-4
21-2. TRANSMISSION REPAIR (CONT)
NOTE
Based on dimension "E", select proper selective spacer from Table 21-1. Selective Spacer Chart.
TABLE 21-1.
SELECTIVE SPACER CHART
DIMENSION "E"
USE P/N
SPACER INSIDE
DIAMETER
0.180-0.190 in.
0.457-0.482 cm
29503226
1 NOTCH
0.192-0.201 in.
0.487-0.510 cm
29503227
2 NOTCHES
0.202-0.212 in.
0.513-0.538 cm
29503228
3 NOTCHES
0.213-0.223 in.
0.541-0.566 cm
29503229
4 NOTCHES
0.224-0.233 in.
0.569-0.591 cm
29503230
5 NOTCHES
0.234-0.244 in.
0.594-0.619 cm
29503231
6 NOTCHES
0.245-0.254 in.
0.622-0.645 cm
29503232
7 NOTCHES
(34) Position transmission with main housing (1) horizontal.
(35) Install selective spacer (30) on P3 planetary (31) shaft.
21-12
