TM 9-2320-366-34-4
21-2. TRANSMISSION REPAIR (CONT)
CAUTION
The main housing module must be horizontal
before removing C3 and C4 clutch module.
Failure to comply may result in damage to
equipment.
(16) Position transmission with main housing (7) in horizontal
position.
(17) Remove 12 bolts (26), and C3 and C4 clutch (27) from
main housing (7).
b. Inspection
(1) Measure thickness of seven C5 friction plates (1),
minimum thickness 0.114 in. (0.289 cm).
(2) Lay a straight edge across each C5 friction plate (1),
maximum bend in friction plate 0.016 in. (0.040 cm).
(3) Measure oil groove depth in each C5 friction plate (1),
minimum oil groove depth 0.008 in. (0.020 cm).
21-6
