TM 9-2320-366-34-4
20-8. FRONT GEAR HOUSING AND IDLER GEAR REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Camshaft removed (para 20-5).
Oil pan removed (para 3-16).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Materials/Parts
Sealing Compound (Item 76, Appendix C)
Personnel Required
(2)
a. Removal.
(1) Remove eight bolts (1) and washers (2) from front gear
housing (3).
(2) Remove five bolts (4) and washers (5) from front gear
housing (3).
(3) Remove three bolts (6), washers (7), and front gear
housing (3) from cylinder block (8).
(4) Remove sealing compound from back of front gear
housing (3).
(5) Remove expansion shield (9) from front gear housing
(3).
(6) Remove idler gear (10) and bearing sleeve (11) from
cylinder block (8).
(7) Remove three bolts (12) and stub shaft (13) from
cylinder block (8).
20-58
Change 1
