TM 9-2320-366-34-4
NOTE
Replace any part that fails visual inspection
or size measurement requirements.
(3) Measure thickness of thrust plate (2).
Minimum
thickness is 0.182 in. (0.462 cm).
NOTE
If
camshaft
fails
inspection,
camshaft
bearings and cam roller followers must also
be replaced.
(4) Inspect camshaft lobes (3) and journals (4) for pitting,
cracks, corrosion, and evidence of overheating.
(5) Inspect camshaft gear (5) for cracks and damaged or
broken teeth.
(6) Measure distance between camshaft shoulder (6) and
camshaft gear (7). Minimum distance is 0.188 in. (0.478
cm).
20-53
