TM 9-2320-366-34-4
20-8. FRONT GEAR HOUSING AND IDLER GEAR REPLACEMENT (CONT)
(5) Install expansion shield (7) in front gear housing (6).
NOTE
Step (6) requires the aid of an assistant.
(6) Position front gear housing (6) on cylinder block (2) with
two washers (8) and bolts (9).
(7) Position four washers (10) and bolts (11) in front gear
housing (6).
(8) Position eight washers (12) and bolts (13) in front gear
housing (6).
(9) Tighten two bolts (9) and four bolts (11) to 15-25 lb-ft
(20-34 N·m).
(10) Tighten eight bolts (13) to 60-90 lb-ft (81-122 N·m).
c. Follow-On Maintenance
(1) Install oil pan (para 3-16).
(2) Install camshaft (para 20-5).
End of Task.
20-60
