TM 9-2320-366-34-4
(2) Remove two screws (5) from thrust plate (6).
CAUTION
Use extreme care when removing camshaft to
prevent damage to camshaft journals and lobes.
Failure to comply may result in damage to
equipment.
(3) Remove thrust plate (6) and camshaft (7) from cylinder
block (8).
NOTE
• Perform steps (4) and (5) if camshaft bearings
fail inspection or if camshaft is being replaced.
• Note location of camshaft bearing joints and
bearing oil holes during removal.
(4) Remove No. 1 camshaft bearing (9) from cylinder block
(8).
(5) Remove six camshaft bearings (10) from cylinder block
(8).
20-51
