TM 9-2320-366-34-4
(6) Rotate clamp (11) 180 degrees.
(7) Perform steps (5) and (6) on left side clamp.
NOTE
Left
and
right
side
L-brackets
are
repositioned the same way.
Right side
shown.
(8) Remove screw (13), self-locking nut (14), and L-bracket
(12) from rear crossmember (5).
NOTE
The L-bracket will be mounted with elongated
hole against the rear crossmember and long
end of L-bracket pointing down.
(9) Position L-bracket (12) on rear crossmember (5) with
screw (13) and self-locking nut (14).
(10) Perform steps (8) and (9) on left side L-bracket.
Change 1
18-53
